Description
Properties
- Strong cold welding formula
- For many hard and soft plastics
- Fast bonding
- Colourless
Application
Suitable for:
Attains an excellent bond strength on numerous types of plastics such as polystyrene and high impact polystyrene types (ABS, SAN, SB, ASA), PVC hard. Limited application on Plexiglas® (PMMA), Celluloid®, cellulose ester (CN, CAB), polycarbonate (PC). Phenolic resins (Bakelite®), melamine resins (Resopal®), glass fibre reinforced polyester, polyurethane (PUR) and epoxide resins (EP) can be glued as well. Glues also materials such as wood, paper, cardboard, leather, metals, glass, ceramics.
Not suitable for:
Not suitable for polyamide (PA), acetal resin (POM) polyethylene (PE), polypropylene (PP), polytetrafluoroethylene (PTFE), silicons (Si), Styropor® and not suitable for leather used for clothing.
Handling
Before use:
Surface requirements
The areas to be glued must be dry and free of any dust or grease.
During use:
Directions for use
Depending on the requirement, apply to one or both of the materials to be joined and stick together immediately. An initial bond strength is attained after 5 - 10 minutes. The high bond strength is attained by melting the plastic surface. For this reason, the adhesive should only be applied in small quantities to thin walled plastics.
After use:
Stains/residue
Smeared adhesive and stains can be removed with acetone or thinner for nitrocellulose lacquer.
Storage conditions
Store in a dry, cool and frost-free place.