Attains an excellent bond strength on numerous types of plastics such as polystyrene and high impact polystyrene types (ABS, SAN, SB, ASA), PVC hard. Limited application on Plexiglas® (PMMA), Celluloid®, cellulose ester (CN, CAB), polycarbonate (PC). Phenolic resins (Bakelite®), melamine resins (Resopal®), glass fibre reinforced polyester, polyurethane (PUR) and epoxide resins (EP) can be glued as well. Glues also materials such as wood, paper, cardboard, leather, metals, glass, ceramics.

Not suitable for polyamide (PA), acetal resin (POM) polyethylene (PE), polypropylene (PP), polytetrafluoroethylene (PTFE), silicons (Si), Styropor® and not suitable for leather used for clothing.

The areas to be glued must be dry and free of any dust or grease.

Depending on the requirement, apply to one or both of the materials to be joined and stick together immediately. An initial bond strength is attained after 5 - 10 minutes. The high bond strength is attained by melting the plastic surface. For this reason, the adhesive should only be applied in small quantities to thin walled plastics.

Smeared adhesive and stains can be removed with denatured alcohol or thinner for nitrocellulose lacquer.

Store in a dry, cool and frost-free place.