Montagekit® Professional

Tube 125 g (Blister) Beige

Extra strong, universal, filling assembly adhesive based on neoprene rubber.

Montagekit® Professional

Description

Properties

  • Very high final bond strength
  • Can be used internally and externally
  • Filling
  • Suitable for materials under stress
  • Suitable for joining non-porous materials together
  • Permanently elastic
  • Universally applicable
  • Suitable for uneven surfaces
  • Shortly correctable
  • Water resistant
  • Temperature resistant
Back to top

Application

Suitable for:

  • Suitable for assembling all kinds of (building) materials, such as wood, stone, concrete, metal and many synthetics on nearly all substrates of stone, concrete, wood, metal, synthetics, plasterwork, gypsum board, etc. Also very suitable for bonding two non-porous materials and fixing material under strain.
  • Very suitable for mounting timber framework, skirting boards, doorsteps, laths (wood / plastic), panelling, window sills, ceramic tiles, construction boards, drywalls, wood strips, wall covering sheets, panels, insulation, soft and hardboard, panels, sills, nameplates , house numbers, suspension hooks, ducts, electrical outlets and electrical boxes.
Back to top

Handling

Before use:

Working conditions

Only apply at temperatures between +5°C and +40°C.

Surface requirements

Both parts must be dry, clean and free of dust and grease.

Tools

If necessary, use a rubber mallet to tap lightly.

During use:

Handling of packaging

Before using, pierce the tube membrane with the puncture point integrated into the cap.

Directions for use

  • Depending on the weight of the material, apply the adhesive evenly in vertical strips or dots at intervals of between 20 and 40 cm. Always apply adhesive to the corners and along the edges. Assemble materials with a pushing movement and press or knock firmly together. Correction is still possible.
  • With heavy materials, materials under stress, or two non-porous materials, apply the power bonding method. Mount material, press and immediately loosen. Let dry for 5 minutes, assemble in the same place and press firmly or hammer. Adjustment is not possible. For heavy materials, fastenings or supports may be required.

Advice

  • We recommend UHU Poly Max Mounting Kit® for fixing polystyrene foam (tempex).
  • We recommend UHU Poly Max® for fixing natural stone.
  • We recommend UHU Poly Max® for fastening materials in areas with permanent high humidity and/or prolonged contact with water.

After use:

Stains/residue

Use white spirit for cleaning tools and removing wet adhesive residue. Dry adhesive residue can only be removed mechanically.

Storage conditions

Close container properly and store in a dry, cool and frost-freeplace.

Back to top