Skip to content

Enamel Repair Assistant

EAN: 4026700128673Article No.: 7004683
White repair assistant with brush applicator, suitable for repairing scratches, splinterings, bathtub and sink damage, etc. Resistant to hot water, usual household cleaners and diluted bases.
  • White Water, temperature and chemical resistant Liquid for repairing damaged enamel and lacquer Brush in cap
  • Discoloring resistant

Properties

  • White
  • Water, temperature and chemical resistant
  • Liquid for repairing damaged enamel and lacquer
  • Brush in cap
  • Discoloring resistant

Application

Suitable for:

For mending scratches, splintering or all kind of damages on white bathtubs and sinks.

Handling

Before use

Working conditions

Do not use at temperatures below +10°C

Surface requirements

Surfaces which are to be touched up must be clean, dry and free of oil, grease and dust.

Tools

Brush included in bottle cap.

During use

Directions For Use

Apply a thin coat of the repair assistant using the brush and leave to dry for 24 hours. If necessary, apply another coat and leave to dry for a further 24 hours. Repeat the process a number of times, if needed.

Advice

If necessary, the enamel repair assistant may be diluted with acetone; a colour paste can be used to dye the repair adhesive.

Points of attention

Contains volatile, highly flamable liquid solvants; appropriate precautions should therefore be taken during storage or during usage. Ensure proper ventilation when used on large areas.

After use

Stains/residue

Remove fresh stains immediately with acetone.

Storage conditions

Store in a dry, cool and frost-free place.

Documents

Similar products