Screw Safe
- Universal Prevents metallic screwed joints from loosening Gap filling - avoids seizing up Can be unscrewed again with tools Water, oil and solvant resistant Temperature resistant from -55°C up to +150°C
Properties
- Universal
- Prevents metallic screwed joints from loosening
- Gap filling - avoids seizing up
- Can be unscrewed again with tools
- Water, oil and solvant resistant
- Temperature resistant from -55°C up to +150°C
Application
Fixing of metallic screwed joints.
Handling
Before use
The parts which should be connected should be free of oil and grease.
During use
Apply the threadlocker to one of the parts to be joined, then connect the parts and put in the screws. Hardening starts directly after the screws have been screwed in or the nuts have been tightened. Initial strength is attained after 10 - 20 minutes, functional strength is attained after 3 hours. Final strength is reached after 12 hours (at room temperature).
Avoid contact of the threadlocker with plastic material.
Avoid contact with the eyes and repeated continued contact with the skin. Wash the contaminated skin with soap and water. If splashes get in your eyes, rinse well with water and seek medical attention.
After use
Clean tools and remove excess adhesive straight away. For this purpose, acetone or thinner for nitrocellulose lacquer (Tri) are suitable. The same applies to spillages on clothing.
Store in a dry, cool and frost free place.