Montagekit® Universal

Blister 100 g Cream

Extra strong, solvent-free assembly adhesive based on acrylic dispersion.

Montagekit® Universal



  • Universal bonding
  • High final bonding strength
  • High level of initial bonding
  • Easy to apply
  • Filling
  • Particularly for interiors
  • Solvent-free
  • Permanently elastic – 15 year warranty
  • Moisture resistant
  • Suitable for uneven surfaces
  • Correctable
  • Resistant to temperatures between -20°C and +80°C
Back to top


Suitable for:

  • Suitable for assembling all kinds of (building) materials such as wood, stone, concrete, metal, many synthetics and polystyrene foam porous onto (porous) surfaces of stone, concrete, wood, plaster, drywall, etc. Also very suitable for surface bonding, it improves the initial bond strength.
  • Very suitable for mounting timber framework, skirting boards, doorsteps, laths (wood / plastic), panelling, window sills, ceramic tiles, construction boards, drywalls, wood strips, wall covering sheets, panels, insulation, soft and hardboard, panels, sills, nameplates , house numbers, suspension hooks, ducts, electrical outlets and electrical boxes.
  • Also suitable for decoration materials, such as ornaments and mouldings in plaster, polyurethane and polystyrene foam.
Back to top


Before use:

Working conditions

Only apply at temperatures between +5°C and +40°C.

Surface requirements

Both parts must be dry, clean and free of dust and grease. One of the two parts must be porous (absorbent).


If necessary, use a rubber mallet to tap lightly. For surface bonding use a glue spreader (2 mm).

During use:

Directions for use

Depending on the weight of the material, apply the adhesive evenly in strips or dots at intervals of between 20 and 30 cm. Always apply adhesive to the corners and along the edges. For surface bonding apply adhesive thinly and evenly on one side using a glue spreader. Assemble materials with a pushing movement and press or knock firmly together. Correction is still possible. For heavy materials fasten or support where necessary.

After use:


Remove adhesive residues immediately with water. Dry adhesive residue can only be removed mechanically.

Storage conditions

Close container properly and store in a dry, cool and frost-freeplace.

Back to top