Creativ' Plastics & Miniatures

Tube 33 ml (Blister)

Cold welding formula

Creativ' Plastics & Miniatures



  • Strong cold welding formula
  • For many hard and soft plastics
  • Fast bonding
  • Colourless
  • Made in Germany
Back to top


Suitable for:

Attains an excellent bond strength on numerous types of plastics such as polystyrene and high impact polystyrene types (ABS, SAN, SB, ASA), PVC hard. Limited application on Plexiglas® (PMMA), Celluloid®, cellulose ester (CN, CAB), polycarbonate (PC). Phenolic resins (Bakelite®), melamine resins (Resopal®), glass fibre reinforced polyester, polyurethane (PUR) and epoxide resins (EP) can be glued as well. Glues also materials such as wood, paper, cardboard, leather, metals, glass, ceramics.

Back to top


Before use:

Personal safety

UHU Creativ' Plastic & Miniature contains volatile, highly flammable solvents. Therefore, corresponding safety measures should be taken regarding processing and storage.

Surface requirements

The areas to be glued must be dry and free of any dust or grease.

During use:

Directions for use

Depending on the requirement, apply to one or both of the materials to be joined and stick together immediately. An initial bond strength is attained after 5 - 10 minutes. The high bond strength is attained by melting the plastic surface. For this reason, the adhesive should only be applied in small quantities to thin walled plastics.

After use:


Smeared adhesive and stains can be removed with acetone or thinner for nitrocellulose lacquer.

Storage conditions

Product should be stored in a dry, cool and frost free place.

Back to top