- Light-activated repair adhesive
- Ultra-fast and ultra-strong
- With high-quality LED light incl. 2 batteries
- Unique formula with UV initiator
- Fills gaps and seals cracks
- Works on all kinds of materials and surfaces
UHU BOOSTER offers a universal application range and works on transparent as well as on non-transparent materials: Bonds, fills, and seals many plastics, porcelain, ceramics, glass, metal, wood, rubber, and much more.
Not suitable for:
Not suitable for PE, PP, and PTFE.
The LED emits a small amount of UV light. UV rays can be harmful for eyes and skin. Do not look directly into sources of UV light. Do not direct the LED at people or animals.
Surfaces to be glued must be clean, dry, and free of dust and grease.
Preliminary surface treatment
Any dust, oil, grease, wax or separating agent should be thoroughly removed from the surfaces to be stuck together. The best way to achieve this is to rub the parts a number of times with appropriate solvents, such as acetone (if suitable for the material – check first!). For metals and metal alloys it is usually sufficient to roughen the surface using emery paper or by grinding or brushing.
Directions for use
To pierce the membrane, turn the whole cap clockwise firmly onto the tube. Unscrew the top cap to reveal applicator. Apply adhesive generously to one side and press parts together. Switch on the LED: Place the lamp upright and move the switch downwards. Activate the curing by raying the blue light for 5 sec. onto the adhesive (distance < 5 cm; emergence of heat is harmless). After use: Clean nozzle with a dry tissue and replace cap quickly to prevent exposure of the remaining adhesive to the light.
Points of attention
Contains cyanoacrylate. Bonds skin and eyelids together in seconds. Keep out of the reach of children.
Remove wet glue stains immediately with acetone. Cured glue can only be removed mechanically.
Store the tube in a dry, cool and frost-free place.