Skip to content

Glue Gun Creative Low Melt

EAN: 4026700486155Article No.: 48618
Low melt glue gun for hobbyists and for decorative purposes.
  • Operating temperature of only 110 °C for greater safety and versatility when gluing with hot-melt adhesives
  • Transparent
  • Heat-insulated nozzle
  • Also suitable for use on heat-sensitive materials such as polystyrene, soft PVC, etc.
  • Short heat-up period (3 - 5 min.) – quickly ready for use

Properties

  • Operating temperature of only 110 °C for greater safety and versatility when gluing with hot-melt adhesives
  • Transparent
  • Heat-insulated nozzle
  • Also suitable for use on heat-sensitive materials such as polystyrene, soft PVC, etc.
  • Short heat-up period (3 - 5 min.) – quickly ready for use

Application

Suitable for:

Suitable for metal, wood, glass, ceramic, leather, textiles,many plastics etc. Even glues heat-sensitive materials such as polystyrene and soft PVC quickly, cleanly and reliably.

Not suitable for:

Not suitable for Polypropylene (PP), Polyethylene (PE) and P.T.F.E.

Handling

Before use

Working conditions

When using this hot melt glue gun, always follow basic safety precautions. This will reduce the possibility of accidental injury due to burs or electrical shock.

Surface requirements

The areas to be glued must be dry and free of any dust or grease.

During use

Directions For Use

Put gun in clamp and plug in the outlet. Insert oval glue stick into glue gun and allow to warm up for 3 - 5 minutes. Immediatly press the workpieces 15 - 20 seconds together, applying some force, and correct of necessary. The connection is solid and can be loaded within 2 minute (depending on thickness of glue layer). The final bond strenght is reached after 2 hours. Important: Timely insert a new glue stick behind the old one in order to avoid overheating. Avoid contact with nozzle. When gun is not in use for 30 minutes or longer, unplug cord from the outlet. Apply the glue in beads on flexible materials and in beads or dots on hard materials. Larger surfaces are difficult to bond because glue may solidify before applied to entire surface. Bonding strenght is the best when the parts are joined as soon as the glue is applied. After loading a new cartridge, instead allow the gun to heat up again.

Points of attention

This tool must be placed on its stand when not in use. It is for indoor use only. Never leave the glue gun unattended if it is still hot or connected to supply mains. Never remove glue sticks from glue gun, this could damage the mechanism. Never insert other objects into the glue gun than the recommended glue sticks. Be careful when using the glue gun near to combustible materials. Do not use the glue gun in explosive environments.

After use

Stains/residue

Cured adhesive residue can only be removed mechanically.

Storage conditions

After use, allow glue gun to cool completely prior to storage. When not in use, the glue gun should be stored in dry and secure location out of the reach of children.

Documents

Similar products