Skip to content
masthead_3.2-mobile

TWIST & GLUE RENATURE

Solvent-free multi-purpose adhesive in a plant-based plastic bottle

DESCRIPTION

  • Solvent free multi-purpose adhesive from 70% nature-based raw materials
  • Unique twist-applicator for glueing dots, lines and surfaces
  • Soft and handy plastic bottle from 88% sustainable raw materials
  • Reduced CO2-emissions
  • Refillable
  • Dermatologically tested
  • Washes out at 40° C
  • Made in Germany

APPLICATION

SUITABLE FOR:

Universal - glues cardboard, paper, felt, leather, cork, fabrics, wood, among themselves and to metal, porcelain, glass, Styrofoam® and many plastic materials.

NOT SUITABLE FOR:

Not suitable for photos, Polyethylene (PE) and Polypropylene (PP).

HANDLING

BEFORE USE

Working conditions

Do not use at temperatures below +5 °C.

Surface requirements

Materials to be glued must be clean, dry and free of dust and grease.

Preliminary surface treatment

When glueing plastics or metal, better results can be obtained if the parts to be stuck together are slightly roughened first.

DURING USE

Directions for use

Use the green precision nozzle to apply dots of glue or to draw a thin line; twist in direction of the arrows, and the nozzle becomes an oval applicator for narrow and broad collages. Apply the adhesive thinly to one side; press in place. Washes out at 40 °C.

Points of attention

The glue shall not be mixed with other adhesives. Before being refilled, the working bottle must be thoroughly rinsed with water. The adhesive is not affected by frost, i.e. after freezing the product will melt without its glueing properties being altered.

AFTER USE

Stains/residue

Adhesive which has not yet fully dried, can be washed out very easily with cold or warm water. It is advised to machine wash dried adhesive at 40 °C using regular detergent.

Storage conditions

Store in a dry, cool and frost-free place.