- Extremely strong
- Extremely flexible
- Water resistant
- Gap filling
- Resistant to shock and vibrations
- Temperature resistant
- UV resistant
- Acid and solvent-free
Suitable for repairing porous and non-porous materials such as wood, textile, leather, cork, metal, glass, plastic, rubber, ceramic tiles, stone, cement and many other materials. Suitable for indoors and outdoors.
Not suitable for:
Not suitable for Polypropylene (PP), Polyethylene (PE) and P.T.F.E.
The materials to be bonded must be clean, dry, free of dust and grease.
The surface must be dry, clean and free of dust and grease.
Preliminary surface treatment
Surfaces must be clean, dry and free from dust and grease.
Preparation of product
Can be applied directly from the tube using the fine dispensing nozzle.
Directions for use
Apply the adhesive on one side. Press the parts against each other. Adjustments can be made within 5 minutes. The maximum final bonding strength is reached after approximately 24 hours.
Loosen the stuck cap under the hot tap and remove any hardened adhesive in the tube cap with a sharp knife. After use, let some adhesive come out of the tube before you screw the cap on it.
Use white spirit for removing wet adhesive residue. Dry adhesive residue can only be removed mechanically.
Store in tightly closed packaging in a dry, cool and frost-free place.