TWIST & GLUE RENATURE
Solvent-free multi-purpose adhesive in a plant-based plastic bottle
DESCRIPTION
- Solvent free multi-purpose adhesive from 70% nature-based raw materials
- Unique twist-applicator for glueing dots, lines and surfaces
- Soft and handy plastic bottle from 88% sustainable raw materials
- Reduced CO2-emissions
- Refillable
- Dermatologically tested
- Washes out at 40° C
- Made in Germany
APPLICATION
SUITABLE FOR:
Universal - glues cardboard, paper, felt, leather, cork, fabrics, wood, among themselves and to metal, porcelain, glass, Styrofoam® and many plastic materials.
NOT SUITABLE FOR:
Not suitable for photos, Polyethylene (PE) and Polypropylene (PP).
HANDLING
BEFORE USE
Working conditions
Do not use at temperatures below +5 °C.
Surface requirements
Materials to be glued must be clean, dry and free of dust and grease.
Preliminary surface treatment
When glueing plastics or metal, better results can be obtained if the parts to be stuck together are slightly roughened first.
DURING USE
Directions for use
Use the green precision nozzle to apply dots of glue or to draw a thin line; twist in direction of the arrows, and the nozzle becomes an oval applicator for narrow and broad collages. Apply the adhesive thinly to one side; press in place. Washes out at 40 °C.
Points of attention
The glue shall not be mixed with other adhesives. Before being refilled, the working bottle must be thoroughly rinsed with water. The adhesive is not affected by frost, i.e. after freezing the product will melt without its glueing properties being altered.
AFTER USE
Stains/residue
Adhesive which has not yet fully dried, can be washed out very easily with cold or warm water. It is advised to machine wash dried adhesive at 40 °C using regular detergent.
Storage conditions
Store in a dry, cool and frost-free place.