UHU allplast

UHU plast flüssig

UHU plast spezial

UHU por

UHU hart

UHU plast spezial

  • special adhesive for assembling polystyrene parts and many other plastic materials in model building.
  • with a fine needle-shaped nozzle for precise application and to reach areas difficult to access
  • thin liquid adhesive that forms a tough elastic and crystal-clear adhesive film

UHU plast special is a special liquid glue for assembling polystyrene and a wide range of plastic materials with a fine needle-shaped nozzle that enables very precise application as well as access to parts that are difficult to reach. A thin liquid adhesive which forms a tough elastic and cystal clear adhesive film.

Container Content
Bottle with pinpoint applicator 30g
Bottle/Blister 30g


For polystyrene models as well as to bond with other materials such as wood, cardboard and paper. Not suitable for Styrofoam®, PE nor PP.

Use and Handling Instructions

Surfaces must be thoroughly clean, dry and free of dust and grease. Apply a thin layer of adhesive to one side. Place parts together and hold in place for a short time. Do not wipe off any remnant adhesive while wet, but wait until it has hardened and remove by using a sharp knife or a cutter. Firm after approx. 5 -10 minutes; final strength achieved after 24 hours. For thin plastic apply a very thin layer of adhesive.