UHU allplast

UHU plast flüssig

UHU plast spezial

UHU por

UHU hart

UHU plast flüssig

  • special adhesive for assembling polystyrene parts and a wide ranges of plastic materials.
  • particularly suitable for surface assemblies thanks to its integrated brush
  • thin liquid adhesive forms a tough elastic, crystal clear film

UHU plast liquid is a special glue for assembling polystyrene and a wide range of plastic materials. It comes with an integrated brush which makes it suitable for surface assemblies. UHU plast is a thin liquid adhesive which forms a tough elastic, cystal-clear adhesive film.

Container Content
Bottle with brush 17g
Bottle with brush 17g

Materials

For polystyrene models as well as to bond with other materials such as wood, cardboard and paper. Not suitable for Styrofoam®, PE nor PP.

Use and Handling Instructions

Surfaces must be thoroughly clean, dry and free of dust and grease. Apply a thin layer of adhesive to one side. Place parts together and hold in place for a short time. Do not wipe off any remnant adhesive while wet, but wait until it has hardened and remove by using a sharp knife or a cutter. Firm after approx. 5 -10 minutes; final strength achieved after 24 hours. For thin plastic apply a very thin layer of adhesive.