UHU Heißklebepistole |
UHU Heißklebepatronen |
UHU Heißklebepatronen |
UHU pistole LT 110 |
UHU klebepatronen LT 110 |
UHU Heißklebepistole
HT 210
- high melting temperature of approx. 210°C
- short heating time and high melting capacity
- non-drip protection for clean and precise work
- mechanical feed - for glue stics with 11 mm Ø
- additional long nozzle
UHU Hot-Melt glue gun HT 210 is perfectly suited for hobbies, handicraft and industry. The glue gun best operates at temperatures of approximately 210°C. A short heating time and a mechanical feed of the glue sticks allows for rapid application and fatigue-proof work. UHU Hot Melt HT 210 is suitable for UHU HT- glue sticks as well as all commercial 11 mm Ø glue sticks. Nozzle is changeable. Also includes a long-tip nozzle and 3 additional glue stics of UHU HT Hot Melt 210. Ideal for repairing, fixing, sealing or isolating of all glueable materials.
| Container | Content |
|---|---|
| Pistole HT 210 | 1 |
Materials
For gluing, repairing, fixing, sealing and isolating for all glueable materials. Not suitable for heat sensitive materials nor for PE, PP and PTFE.
Heat sensitive materials such as soft-pvc can be glued with the UHU Low-Melt gun LT 110 / 110 XL.
Use and Handling Instructions
Connect the glue gun electric cable to electricity socket (110-220 V) and let heat 2 minutes. When the gun has heated up slide a glue stick into the back and push through using the trigger. The glue melts and comes out of the nozzle. Apply hot glue to one of the surfaces, then place the parts together immediately. Temperature of material to which applied should not be less than room temperature. Heat cold materials such as metal and stone before sticking. Always push sticks through completely. Never pull sticks back as this could damage the gun's feeder mechanism.
