Skip to content

Por

EAN: 4026700413410Article No.: 63187
POR is a quick-setting special adhesive for bonding expanded polysterene, e.g. Styropor® also in combination with other materials. It forms an elastic adhesive film which is highly resistant to age and which is colorless and waterproof.
  • Quick-setting
  • Elastic adhesive film is colourless, non-ageing Waterproof

Properties

  • Quick-setting
  • Elastic adhesive film is colourless, non-ageing
  • Waterproof

Application

Suitable for:

Suitable for expanded polysterene, e.g. Styropor® also in combination with other materials, e.g. wood, paper, metal, ceramic, plaster, fabric and various plastics.

Not suitable for:

Not suitable for PP, PE, PET, PTFE, POM and SI.

Handling

Before use

Working conditions

Do not use at temperatures below +5°C.

Surface requirements

The surface must be dry, clean and free of dust and grease.

During use

Directions For Use

The adhesjve is normally applied to both surfaces. The period of adhesion depends on the quantity of adhesive applied and the absorption capacity of the material for bonding. Firm adhesion is obtained between 5 and 20 minutes after application. The correct moment for joining has been reached when the adhesive, gently touched with the fingertips, has become touch-dry (so-called finger test).

Advice

As this adhesive needs moisture for hardening, the process can be speeded up by breathing on one of the parts of the assembly. The hardening process may take longer if humidity is low.

Points of attention

The product contains volatile, highly flammable solvents; precautions are therefore necessary during use and storage. Ensure proper ventilation when using over large areas.

After use

Stains/residue

Light petrol should be used for the removal of smeared adhesive and the cleaning of working tools (brushes etc.).

Storage conditions

Store in tightly closed packaging in a dry, cool and frost-free place.

Documents

Similar products